3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series ? tripolarized for robust alignment when mating to 820 series socket ? 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products ? latching ejector for rugged high performance applications ? available for through hole or surfacemount attachment ? high temperature plastic for lead free surfacemount or paste-in-hole soldering methods ? four-wall shroud provides contact protection ? contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100 ? see the regulatory information appendix (ria) in the rohs compliance section of www.3mconnectors.com for compliance information date modi? ed: november 14, 2012 ts-0253-j sheet 1 of 7 physical insulation: material: high temperature plastic (lcp) flammability: ul 94v-0 color: black contact: material: copper alloy plating: underplating: 100 " [2.54 mm] nickel wiping area: 30 " [0.76 mm] gold solder tails: matte tin or tin lead (see ordering information) marking: 3m logo, part number and orientation triangle mating compatibility: 820 series (ts-0254) electrical current rating: 3.00 a, 1 contact powered 2.00 a, 4 contacts powered 0.75 a, all contacts powered rating conditions: eia-364-070 method 2, 30 degrees c maximum temperature rise, 20% derated. reference appropriate 3m product speci? cation for detailed current derating curves. insulation resistance: > 1 10 9 at 500 v dc withstanding voltage: 500 v rms at sea level environmental temperature rating: -55c to +105c process rating: maximum 260c (pro? le per j-std-020c) moisture sensitivity level: 1 (per j-std-020c) ul file no.: e68080
ts-0253-j sheet 2 of 7 inch [imm] tolerance unless noted .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference only ordering information pth right angle header 81xxx - 5x0x03 - xx notes: d p o s i tio n 1 o r ient a t ion trian g l e . 440 . 010 [ 11. 18] . 6 2 0 r e f [ 15. 75 ] . 4 0 5 [ 10. 29] . 2 6 5 [ 6 . 73] 2x ? . 1 1 6 [ 2 . 9 5 ] . 1 0 5 [ 2 . 6 7 ] . 160 ref [ 4 . 06] . 306 ref [ 7 . 77] ?f? ( s ee table 2 ) . 0 1 5 [ 0 . 38] . 1 4 0 . 0 1 0 [ 3 . 5 6 ] s hort lat c h lon g l a t c h . 165 . 0 1 0 [ 4 . 1 9 ] . 828 ref [ 21. 0 3 ] table 1 contact quantity dimensions a b c d short (ref.) d long (ref.) 020 1.060 [26.92] 0.722 [18.34] 0.500 [12.70] 1.671 [42.44] 1.842 [46.79] 026 1.210 [30.73] 0.872 [22.15] 0.650 [16.51] 1.821 [46.25] 1.992 [50.60] 036 1.460 [37.08] 1.122 [28.50] 0.900 [22.86] 2.071 [52.60] 2.242 [56.95] 040 1.560 [39.62] 1.222 [31.04] 1.000 [25.40] 2.171 [55.14] 2.342 [59.49] 050 1.810 [45.97] 1.472 [37.39] 1.250 [31.75] 2.421 [61.49] 2.592 [65.84] 060 2.060 [52.32] 1.722 [43.74] 1.500 [38.10] 2.671 [67.84] 2.842 [72.19] 068 2.260 [57.40] 1.922 [48.82] 1.700 [43.18] 2.871 [72.92] 3.042 [77.27] 080 2.560 [65.02] 2.222 [56.44] 2.000 [50.80] 3.171 [80.54] 3.342 [84.89] 100 3.060 [77.72] 2.722 [69.14] 2.500 [63.50] 3.671 [93.24] 3.842 [97.59] c table 2 pcb thickness "f" solder tail length .010 .062 [1.57] .090 [2.29] .094 [2.39] .112 [2.84] .125 [3.18] .143 [3.63] a b c . 015 x . 0 1 5 [ 0 .38 ] x [ 0 . 3 8 ] s ee note 1 p o sition 2 2 x . 092 [ 2 . 34] . 3 1 0 [ 7 . 87] p o s i tio n 1 . 050 typ [ 1 . 2 7 ] . 100 ref [ 2 . 54] . 0 1 5 x . 015 [ 0 . 38] x [ 0 . 38] notes: 1. this polarization bump does not exist on the 20 position header. 2. recommended to be mated to the .050" x .100" wiremount socket 820 series. ejector/latch system: 0 = none (special order) 5 = with short ejectors installed (special order) 6 = with long ejector latches installed (standard) contact tail: 2 = solder tail for .062 [ 1.57 ] pc board (standard) 3 = solder tail for .094 [ 2.39 ] pc board (special order) 4 = solder tail for .125 [ .318 ] pc board (special order) plating suffx: blank = 125 " tin lead tails (ria e3 & c2 apply) rb = 250 " matte tin tails (ria e1 & c1 apply) contact quantity (see table 1) ejector latches (if ordered separately) long latches 3505-28b (black) short latches 3505-29b (black) 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
ts-0253-j sheet 3 of 7 * s o l der thie f sold er pad s ( s ee not e 2 ) . 0 5 0 .00 2 [ 1 . 27] . 100 . 002 [ 2 . 54] . 0 45 - . 0 6 0 [ 1 . 14] - [ 1 . 52] . 025 - . 0 3 5 [ 0 .64 ] - [ 0 .89 ] * s olde r t h i ef s o lder p a d s r e quir e d only on s old e r s i de o f p c b o a r d . view a ? . 0 2 4 . 0 0 3 typ [ 0 . 64] . 050 . 0 0 2 t yp [ 1 . 27] t o l e ranc e noncumu l a t ive f l o w s o lder direct i o n p o sition 2 p o sition 1 . 100 . 002 [ 2 . 5 4 ] 2 x ? . 109 . 002 [ 2 . 7 7 ] ? . 0 2 4 . 0 03 typ [ 0 . 64] c . 0 0 2 e . 0 2 5 .00 2 [ 0 . 64] . 355 max [ 9 . 02] . 3 05 min [ 7 . 7 5 ] .16 0 . 0 0 2 [4. 0 6 ] v i e w a table 3 ejector latches dimension e min none .575 [14.61] long 1.010 [25.65] short .885 [22.48] recommended mounting hole pattern pth right angle header (shown for mounting side of pc baord) notes: 1. recommended to process pc boards through the solder bath such that the connector enters end frst (two solder tails at a time). this will help prevent solder bridging. 2. a dummy or solder thief solder pad at the end of each row is recommended on the bottom or solder side of the pc board in order to help prevent solder bridging on the end solder tails. the solder thiefs are only required on the end of the rows which leave the solder bath last. 3. in order to facilitate soldering it is recommended that ejector latches be installed after the soldering process. 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
ts-0253-j sheet 4 of 7 table 1 contact quantity dimensions a b c short (ref.) c long (ref.) d 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] 0.860 [21.84] 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] 1.010 [25.65] 036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 1.260 [32.00] 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 1.360 [34.54] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] 1.610 [40.89] 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 1.860 [47.24] 068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042 [77.27] 2.060 [52.32] 080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] 2.360 [59.94] 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] 2.860 [72.64] c notes: 1. this polarization bump does not exist on the 20 position header. 2. recommended to be mated to the .050" x .100" 820 series socket. ordering information pth straight header 81xxx - 6x0x0x - xx ejector/latch system: 0 = none (special order) 5 = with short ejectors installed (special order) 6 = with long ejector latches installed (standard) contact tail: 2 = solder tail for .062 [ 1.57 ] pc board (standard) 3 = solder tail for .094 [ 2.39 ] pc board (special order) 4 = solder tail for .125 [ .318 ] pc board (special order) plating suffx: blank = 125 " tin lead tails (ria e3 & c2 apply) rb = 250 " matte tin tails (ria e1 & c1 apply) contact quantity (see table 4) ejector latches (if ordered separately) long latches 3505-28b (black) short latches 3505-29b (black) a b s ee not e 1 posit i on 2 . 3 1 0 [ 7 . 8 7 ] p o sition 1 . 0 15 x .01 5 [ 0 . 3 8 ] x [ 0 . 38 ] . 050 t y p [ 1 . 27] . 100 ref [ 2 . 54] optional press t post mount alignment feature position 1 orientation triangle [0.38 x 0.38] 4.18 .165 .010 2.34 .092 2x 10.29 .405 .38 .015 21.03 .828 ref 15.75 .620 ref 2,95 .116 2x? 11.17 .440 .010 .015 x.015 d . 265 [ 6 . 73] . 1 4 0 . 0 1 0 f ( s ee table 2 ) . 100 [ 2 . 5 4 ] .05 ref contact mating point table 5 pcb thickness "f" solder tail length .010 .062 [1.57] .092 [2.34] .094 [2.39] .110 [2.79] board mounting options: 1 = none (special order) 3 = press ft posts both ends (standard) 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
ts-0253-j sheet 5 of 7 . 050 . 002 [ 1 . 27] ? . 025 . 003 [ 0 . 6 4 ] . 100 . 002 [ 2 . 5 4 ] . 0 4 5 - . 060 [ 1 . 14] - [ 1 . 52] . 0 25 - .03 5 [ 0 . 64] - [ 0 . 8 9 ] * s olde r thie f sol der pads requ ired onl y on sold er s i de o f pc b o ard. view a * s o l der thie f s o l d e r p ads ( s ee not e2) v i ew a 2 x . 2 0 5 .00 3 [ 5 . 2 1 ] . 050 . 002 typ [ 1 . 27] tole rance noncumul ati v e flow sol der dir ectio n . 160 m i n [ 4 . 06] . 0 5 0 . 0 0 3 [ 1 . 2 7 ] . 100 . 002 [ 2 . 54] . 225 m i n [ 5 . 72] . 1 0 0 . 002 [ 2 . 5 4 ] 2 x ? . 109 . 002 [ 2 . 7 7 ] d . 002 e ? . 025 .00 3 t yp [ 0 . 64] v i e w a table 6 ejector/latches dimension e (min) none .215 [5.46] long .650 [16.51] short .525 [13.34] inch [imm] tolerance unless noted .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference only recommended mounting hole pattern pth vertical header (shown for mounting side of pc board) note: 1. recommended to process pc boards through the solder bath such that the connector enters end frst (two solder tails at a time). this will help prevent solder bridging. 2. a solder thief solder pad (dummy pad) at the end of each row is recommended on the bottom or solder side of the pc board in order to help prevent solder bridging on the end solder tails. the solder thiefs are only required on the end of the rows which leave the solder bath last. 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
ts-0253-j sheet 6 of 7 .34 6 . 0 1 0 [8. 7 9 ] . 1 40 .010 [ 3 . 56] . 2 6 5 [ 6 . 7 3 ] p o si t i o n 1 o rien t a t ion t riang l e . 4 4 0 . 010 [ 1 1 . 18] . 6 2 0 ref [ 1 5 . 7 5 ] d .16 5 . 0 1 0 [4. 19] s hor t lat c h l o ng lat c h . 0 9 2 [ 2 . 34] opt i o n al sing le press fit p o s t mount/a lign m ent feat ure ? .11 6 [ 2 . 95] o p t i ona l m e t a l c l ip rete nti o n . 015 [0. 3 8 ] . 405 [ 10. 29] . 8 28 ref [ 2 1 . 0 3 ] . 093 [ 2 . 36] .05 ref contact mating point table 7 contact quantity dimensions a b d short (ref.) d long (ref.) tape & reel suffx 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] wd 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] wf 036 1.460 [37.08] 1.122 [28.50] 2.071 [52.60] 2.242 [56.95] 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] wf 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] 068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042* [77.27] wg 080 2.560 [65.02] 2.222 [56.44] 3.171* [80.54] 3.342* [84.89] 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] wh *requires wh pocket tape ordering information smt straight header 81xxx - 6x0c0x - xx - xx ejector/latch system: 0 = none (special order) 5 = with short ejectors installed (special order) 6 = with long ejector latches installed (standard) board mounting options: 1 = none 4 = press fit post mount at position 1 end 7 = metal retention clips 8 = #1 end press ft post & metal retention clips (special order) packaging options: blank = trays wx = tape & reel package (see table) contact quantity (see table 7) ejector latches (if ordered separately) long latches 3505-28b (black) short latches 3505-29b (black) c inch [imm] tolerance unless noted .0 .00 .000 inch .1 .01 .005 [ ] dimensions for reference only plating suffx: blank = 125 " tin lead tails (ria e3 & c2 apply) rb = 250 " matte tin tails (ria e1 & c1 apply) notes: 1. this polarization bump does not exist on the 20 position header. 2. recommended to be mated to the .050" x .100" 820 series wiremount socket. 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
ts-0253-j sheet 7 of 7 . 0 6 5 . 002 typ [ 1 . 65] t yp, f ull r detail a opt i ona l p l a t ed t h ru hole for meta l clip r e t e nti o n . 042 . 0 0 3 t yp (pla t e d t h r u h o le) [ 1 . 07] r e commend ed mountin g h o le pattern, smt straig ht h e ade r (sho w n f or moun tin g sid e of pc boa r d ) .05 0 . 0 02 typ [1. 2 7 ] t o l e r a n c e n o n c u m u l a t i ve 2x . 075 . 002 [ 1 .90 5 ] . 205 . 003 [ 5 . 21] . 3 7 6 [ 9 . 55] . 2 8 0 [ 7 . 1 1 ] h option al d r illed hole f o r p l a st i c post ? . 1 0 9 . 002 [ 2 . 7 7 ] . 2 2 0 . 003 [ 5 . 5 9 ] . 158 . 002 [ 4 . 01] see det ail a f . 029 . 001 [ 0 . 74] p o sit i o n 2 . 110 . 0 0 2 [ 2 . 79] p o sit i on 1 c l c l c l c l g ejector latches dimensions h min none .775 [19.69] long 1.085 [27.56] short 1.21 [30.73] no. of positions dimensions f g 20 .450 [11.43] n/a 26 .600 [15.24] .025 [0.64] 36 .850 [21.59] n/a 40 .950 [24.13] n/a 50 1.200 [30.48] .025 [.64] 60 1.450 [36.83] 0.000 68 1.650 [41.91] 0.000 80 1.950 [49.53] 0.000 100 2.450 [62.23] 0.000 3 electronic solutions division interconnect solutions http://www.3mconnectors.com 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? 4-wall, tripolarized header .050" .100" latch/ejector, pth & smt straight, pth right angle 810 series
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2012. all rights reserved. ria-2217b-e 3 3m electronics solutions division 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3mconnectors.com 3m is a trademark of 3m company.
|
